Recommended Hub and Drum and Brake Assemblies for Mobile Home Axles on Trailer

Hi there, I tried researching they QandA section but couldnt find exactly what I needed. I have a trailer I received that has mobile home axles under it. Im looking to replace the hubs on my trailer with hubs that would accept a standard trailer wheel and tire with lugs instead of the clamp ring I currently have. I will attach my measurements taken. I used a diagram in a QandA question to get the measurements. I take them to be the following: Bearings: Inner bearing: 1.75 inner diameter Outer bearing: 1.25 inner diameter Grease seal: 2.25inch i believe my caliper was reading a little off as it showed 2.2630, I also had not fully cleaned that surface Can you please point me in the direction of the correct hub I would need to replace this with? And do you offer a brake rebuild kit as well that would be compatible with my brakes? The hub itself is a 12 hub. The rear axle is a match but without brakes. Do you also sell an idler hub in this size? Thank you very much

asked by: Chip S