Does Curt Q20 Fifth Wheel Hitch Fit Same Rails as Curt Q20

Question

Question:

Will the Kurt Q20 hitch fit same rails as Valley 7040

asked by: Rick

1

Helpful Expert Reply:

Yes, the Curt Q20 hitch part # C16130 will fit the same industry standard fifth wheel rails that a Valley 7040 fifth wheel hitch will fit.

expert reply by: Jameson C

1

Answer 1

You'll need spacers, but you can use the Firestone air bags on your 2016 Chevy Silverado 2500 with a 6 inch lift. What you need is the following: - Firestone Ride-Rite Air Helper Springs #F2613 - Air Lift Universal Air Spring Spacers - 6"…

view full answer...

Answer 2

For your 2017 Chevy Silverado 3500 the 5th Wheel/Gooseneck Hitch Wiring harness part #C56070 would be the correct fit as your truck uses the standard 7-way round connector that this uses/needs. It is possible the wire colors you are working with…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 6

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 7

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 8

Hello Gary. For your 2024 Chevy Silverado 2500 HD with short bed it is recommended to have a sliding hitch to ensure that you can get around those really tight turns without damaging the cab of your truck. For a Curt sliding hitch I would recommend…

view full answer...

Answer 9

Hi John; I would go the suspension enhancement route to reduce the sag on your 2022 Ford F-150. Out of all of the options you referenced I would personally choose the #AL82WQ. Air bags have the most adjustability so you can get them just right with…

view full answer...

Answer 10

Hey Jay. It sounds like you are on the right track here because a sidewinder pin box will be your only option for pulling your 5th wheel since you have a short bed truck with the Rambox. That said, you are right that the Reese Sidewinder cannot be…

view full answer...

Answer 11

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Answer 12

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Does Curt Q20 Fifth Wheel Hitch Fit Same Rails as Curt Q20

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching