Recommended Replacement Hubs and Drums for AL-KO 8490 Hubs on Weekend Warrior Trailer
Question:
I have a ww fs2300. The drums are stamped al-ko 8490 / wf4 / 4902. I looked at your replacements AKHD-545-35-EZ-K but the wheel mounting surface appears to be built up more the area behind the studs. I have space limitations in regards to overall axle width due to a poor design by ww. I want to make sure these do not increase the width over the stock ones. Thank you
asked by: Matt T
Expert Reply:
Based on my research, it looks like your AL-KO 8490 hubs are designed for 3,500 pound axles, feature a 10 x 2-1/4 inch drum and have a 5 on 4-1/2 inch bolt pattern. The etrailer.com Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K referenced in your question is very likely the correct replacement hub and drum for your trailer. In order to confirm this, I do recommend pulling your existing hub to see if it uses the # L68149 inner bearing and # L44649 outer bearing. This information should be stamped onto the bearings themselves. As long as the bearing information matches up to your current set, this assembly will work perfectly as a replacement.
The hub will sit on the spindle at the same location as your current hubs, so you wll not need to worry about it being larger in width.
I have attached an installation video on this hub and drum that you might also find helpful.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Replacement Shoe and Lining Kit for Manual Adjusting 10" Electric Brake Assembly - 3,500 lbs
- Shop: Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Shop: Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Bearing Kit, LM67048/25580 Bearings, GS-2125DL Seal
- Search Results: 25580
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Detailed Breakdown of the etrailer Electric Trailer Brakes
- Article: Most Popular Wheel Bearings
- Q&A: What is the Best Grease for Trailer Bearings
- Search Results: trailer brakes
- Shop: Trailer Wiring
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Shop: Suspension Enhancement
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: l68149
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Search Results: leaf spring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Brake Controller
- Q&A: How to Convert a Trailer with Surge Brakes to Electric Over Hydraulic Brakes
- Shop: Fifth Wheel Hitch
- Video: All You Need to Know About the Kodiak Disc Brakes
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Article: My Trailer Hitch Doesn't Fit
- Search Results: l44649
on Trailer Hubs and Drums
