Replacement Brake Assembly Hardware for 10 inch or 12 inch Brake Assemblies  

I recommend using the Never Fail Bushings - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" - Qty 14 #LC279685. For 1-3/4 inch springs you will want the Shackle Bolt with Locknut for Double-Eye Springs - 3"…

Using the Shackle Bolt with Locknut for Double-Eye Springs - 3" Long, part #166081, indicates that your leaf springs are 1-3/4". If that is the case, the bushings you need have an inner diameter of 9/16" and an outer…

The size winch that you will need depends on a couple of different factors. I have included part of our hand winch FAQ below regarding boat winches and have linked the FAQ article for you to view. Finding the Right Capacity Winch for your Boat…

Generally speaking, boat-size-to-winch capacity is 2 to 1, meaning the capacity of the winch you are using should at least be 50 percent of your boat's weight. However, this ratio will be reduced if you are winching a longer distance or if the…

You need a tire and wheel setup with at least 6,400 lb of capacity since that's how much your boat and trailer weighs together so I would not recommend anything in the 13 inch wheel size as nothing in that size will be rated high enough. The next…

The guideline when selecting a winch is to weigh the boat when it is fully loaded and ready to travel with supplies, gas, etc. Then, take the gross weight and divide by 1.5, which will tell you the capacity winch you will need. You will want to weigh…

The mounting bolts used with 12" braking assemblies, like the: -Dexter Electric Trailer Brake Assembly #23-105 for the left side, and #23-106 for the right side, is 1-1/4" Long x 3/8" diameter mounting bolts with the corresponding…

Sounds like you are looking for a mounting bolt kit for your trailer brakes. For that we have the Mounting Bolts and Hardware for 10" Brake Assemblies #BRKH10A. This is for assemblies that attach with 4 bolts. If instead you have 5 bolts…

At this time we do not, but what I can tell you is that the bolts in the Mounting Bolts and Hardware for 12" Brake Assemblies #BRKH12 are just regular grade 5, 3/8"-24 x 1-1/4" bolts that you should be able to source locally from any…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…