What Hubs Will Work with the Timbren Heavy-Duty Axle-Less Trailer Suspension Part # ASR35HDS02

Expert Reply:

The Timbren Heavy-Duty Axle-Less Trailer Suspension part # ASR35HDS02 uses a 25580 (1.750") inner bearing, 15123 (1.250") outer bearing, and 10-10 (2.125") grease seal. As long as the hub you are wanting to use has these bearings/seals then yes it will work for you. The bearing numbers should be stamped into the bearing but if not you can use a digital caliper like part # PTW80157 to measure them.

If you are looking for just an idler hub and your wheels use a 6 on 5-1/2" bolt pattern, I recommend using the Dexter Trailer Idler Hub part # 8-213-51 which is a confirmed fit and will work well for you.

expert reply by: Conner L

0