Height from Bottom of Coupler Lip of Yakima Rack and Roll Trailer to Ground When Trailer is Level  

While there isn't a life expectancy, per se, of the shocks on the Yakima Rack and Roll Trailer - 66" #Y08106 and 78" #Y08107, upgrading to the HD shocks is absolutely a good idea if your gear weighs around 200 llbs and certainly…

The Yakima part number #Y08111 is just the crossbars of Yakima Rack and Roll trailer which the correct size trailer for these 78 inch bars is the part #Y08107. This trailer would be able to accommodate both an e-bike and a trike.

The Yakima Rack and Roll Trailer #Y08107 referenced in your question requires a 2 inch hitch ball, such as the Curt #A-90. For optimum performance, Yakima states that the hitch ball should be installed 22 inches above the ground. You will want to…

The 78 inch Yakima Rack n Roll trailer #Y08107 is actually wider overall than its 66 inch counterpart, #Y08106. So it is not just the crossbars. Because the price difference between the 2 is minimal it would be more beneficial to just go with the 78…

I spoke to my contact at Yakima and she informed me that since your kayaks will be behind your vehicle and not on top it is not as important to have the kayaks strapped down when used on the Yakima Rack and Roll Trailer #Y08106. She did recommend…

I took a look at the Yakima Rack and Roll #Y08106 that you're inquiring about, and it turns out you can actually stand this kayak up completely like you're wanting too. You are just going to have to remove the wheels and the tongue, which is…

The likelihood that your problem is the valve stem on your Rack and Roll trailer #Y08106 is pretty low but if you have a valve stem tool you could try a different one or see if yours is loose. Most likely it's the inner tube though and the…

The tongue of the Yakima Rack and Roll Trailer, #Y08106, is 2 inches x 2 inches. We have this trailer on our lot, so I made a short video for you showing a few different dimensions of the trailer for you. If you are looking for a lightweight jack…

The Yakima Rack and Roll Trailer #Y08106 referenced in your question will work great for your longer trips on the highway. I also spoke with my contact at Yakima to verify this. The hubs on this trailer use sealed bearings, so they will not need any…

I was unable to find an order number for you, so if you need a new Spare Tire with 5 Spoke Rim for Yakima Rack and Roll Trailer #Y08121 you can purchase a new one here, or if you can contact Yakima for their warranty, which does have a lifetime…

I do have an option for you but the only way you'll get away with carrying four total kayaks hull down is a double decker trailer like the Yakima EasyRider Double Decker Trailer part #Y08129. The lower deck is only 54" wide so you'll…

I went to our warehouse and took some measurements of the Yakima Rack And Roll Trailer, part #Y08107. I have attached a photo of the trailer with the dimensions shown. From the center of the hitch ball coupler to the center of the front crossbar in…