bing tracking image
Q & A Icon

What Size Lock Pin Is Needed for the Coupler on the Yakima Rack and Roll Trailer Part # Y08107

Question:

Hi, What should be the diameter of the safety clip/ pin which should be attached to the lever? 1/4, 5/16inch , 3/8inch ??

0

Expert Reply:

It sounds like you are referring to a coupler latch lock that is used to lock the latching mechanism of the coupler onto the hitch ball. If this is the case then you would want to use a 1/4" diameter pin like part # e98886. I have attached a photo of where this pin will need to be installed on the Yakima Rack and Roll Trailer part # Y08107 for you as well.

click to enlarge
expert reply by:
0
Conner L

Question:

What is the length/ span that the pin should have?

0

Expert Reply:

There really isn't a standard length for the coupler latch lock but part # 7691 has a usable length of 2" so I would say that is a good estimate. If for some reason you would like a coupler latch lock with more usable space then you can use part # e98888 which has a usable length of 3-3/8".

click to enlarge
expert reply by:
0
Conner L

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>