Does Vintage Trailer Wheel # AM20312 Require Balancing
Question:
I found that you have my vintage rim for my 1983 5th wheel trailer. I am now relieved. I am wondering if you might have an adapter that will fit the rim to current tire spin balancers.? Any information on that or would I need to have one fabricated? Thanks,
asked by: Bill M
0
Expert Reply:
Actually trailer rims are not normally balanced. Typically what manufacturers will do is line up the heavy and lights spots on the wheel and tire to somewhat balance it and then leave it at that without issue. There would be no need to install balance weights on the Vintage Trailer Wheel # AM20312.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexstar Vintage Steel Wheel w/ +5 mm Offset - 14" x 5-1/2" Rim - 4 on 9.44
- Trailer Tires and Wheels
- Wheel Only
- 14 Inch
- 4 on 9.44 Inch
- Steel Wheels - Powder Coat
- Dexstar
more information >
Continue Researching
- Q&A: Recommended Replacement Vintage Wheels for a 1973 Holiday Rambler
- Q&A: How to Pick Out Correct Awning Arm Replacement
- Q&A: Availability of Trailer Wheels With 4 x 9.44 Bolt Pattern
- Q&A: Recommended Hitch for a 2024 Jeep Grand Cherokee L
- Q&A: Recommended Weight Distribution System for a Trailer w/ Different Weights
- Q&A: Solera RV Awning Conversion Kit Compatibility With CareFree Awnings
- Q&A: Using an Electric Winch to Raise and Lower a Ramp Door on a Logan Horse Trailer
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: RV Propane 101: How Does My RV's Propane System Work?
- Article: How to Measure the Bolt Pattern of a Trailer Wheel
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer