bing tracking image
Q & A Icon

How to Determine the Correct Replacement Steps for 2017 Winnebago Winnie

Question:

Can you advise me as to which double step unit to purchase from the ones you carried? We have a 2017 Winnebago Winnie 170S and would like to replace the single step with a double step unit. Thanks for any advice you could provide us. Thank you.

0

Expert Reply:

In order to determine which double steps to use with your 2017 Winnebago Winnie you will need to know the mounting bolt pattern of your current steps. For example, the Lippert Kwikee 32 Series # LC3722617 has a mounting bolt pattern that is 22" wide x 8" deep. The Lippert Kwikee 40 Series # LC3726891 has a slightly different mounting bolt pattern of 26" wide x 8" deep.

If you let me know what your mounting bolt pattern is I would be happy to make a recommendation for you; I've added a link to our selection of double steps for you to check out as well.

expert reply by:
0
Kyle S

Question:

Thanks for getting back with me. The steps that I would like to use as a replacement step for our Winnebago Winnie Drop are manual steps. I forgot to include the word "Drop" for the description of our travel trailer. The bolt pattern on the frame, however, is 26" across and 4" deep. So, which manual double step unit would recommend to replace our single step unit? Again, thanks for any advice you could provide me.

0

Expert Reply:

Thank you for the dimensions, and though there may be a solution for you, I took a look at each of the manual double steps we carry and none of them have bolt hole centers of 26" wide x 4" deep. You may be able to use the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear # TLA8102 if your Winnie has 25-1/2" of space between factory mounting brackets. These steps have mounting base dimensions of 25-7/16" wide x 12" deep, step platforms which measure 22" wide x 8" deep, a drop/rise of 7-1/2" and are 11-1/2" - 12-1/2" when collapsed with a height of 18-1/2" - 24" from the top of step opening to the ground.

Model # TLA8002 is the same double step that will fit if you have 25-1/2" of space between your factory mounting points but has mounting base dimensions of 27-7/16" wide x 12" deep and are 13-3/4" - 14-3/4" when collapsed with a height of 25-1/2" - 32" from the top of step opening to the ground.

I've added links to video reviews of these steps for you to take a look at.

expert reply by:
0
Kyle S

Products Referenced in This Question




Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>