Replacement Bearings Kit for Wells Cargo Tote Wagon
Question:
I need to replace bearings, races, seals on a Wells Cargo Tote Wagon. There is not a hole through the spindle for a cotter key, so I need your advise on what kit to purchase. The spindle is 1 3/8inch at the base tapering to 1 1/16 inch at the threaded end. The spindle is the type with the grease fitting built in to the threaded end. Thanks for any help you can provide.
asked by: Lee W
0
Expert Reply:
E-Z Lube spindles that have the grease zerk fitting on the end like yours don't use a cotter pin because it would interfere with the grease running through the spindle. Instead they use a tang washer, like part # 5-101, which you should have.
From your measurements it sounds like you have a popular # 84 spindle which uses bearings # L68149 and # L44649 for the inner and outer respectively. Verify with the bearings you have and if they're correct the kit you need is part # BK2-100 which includes the bearings, races, grease seal, the tang washer and the cotter pin that you won't need.
expert reply by: Charles S
0
Products Referenced in This Question
Replacement Spindle Washer - Tang Type for E-Z Lube
- Accessories and Parts
- Trailer Spindles
- Spindle Washer
- 1 Inch I.D.
- TruRyde
more information >
Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer
- Replacement Hub Needed for Dexter Axle 8-256
- 2021 Grand Design Travel Trailer Toy Hauler Axle Components
- Are the L68111 and L68110 Races the Same
- Replacement Bearing Kit For Dexter P-12 SLR Axle
- How to Determine the Correct Hub& Drum and Electric Brakes for 3,500 lb Axle on Trailer
- Replacement Bearings and Seals for Dexter 4.4k Trailer Axle
- Replacement Bearings, Races and Grease Seal for Dexter 8-147 3500lb Axle
- Which Grease Seal Is Used With Bearing L68149 and Race L68110?
- Replacement Grease Seal, Inner Bearing, and Outer Bearing for an ALKO 7230 3500k Axle
- Bearings and Seal for Dexter 4400 lb Axle on 2019 Forest River Rockwood 2910SB Travel Trailer
- Replacement Seals and Bearings for 4,400 lb Axle
- Replacement Bearings for Dexter 8-245 Hub
- Replacement Trailer Grease Seal for an NOK AD2527E Seal on a Boat Mate Trailer
- Bearing Replacements for AL-KO T44 Trailer Axles
- How to Determine Correct Replacement Bearings for Trailer
- How to Select Replacement 10-Inch Hub/Drums for 1997 EZ Loader Boat Trailer
- Locating Replacement L68145 and 144549 Bearings for Trailer
- Replacement Hub, Bearings, Races, and Seals for Trailer Hub with H-1377 Bearing
- How to Pick Out Replacement Hub for UFP Hub Marked H-1377 A4E
- Can Dexter 8-222 Hub be Replaced with 6 on 5-1/2 Inch Hub on Tandem 4 Ton Trailer
- How to Determine Capacity of Trailer Axle to Replace Springs
- Replacement Bearing Race and Grease Seal For Trailer Hub
- Replacement Bearings for 2006 Fleetwood Niagara Trailer with 10 Inch Brakes
- What is the Correct Race for Use with Bearing # L68149?
- Inner and Outer Bearing and Grease Seal for Older Trailer
- Do Bearings Come in Different Sizes
- How to Pick Out Replacement Bearings for a Trailer
- Replacement Bearings and Seal for Freedom Axle 45264 Hub Assembly