Where In Truck Bed to Install B and W Turnoverball # BWGNRK1500  

B & W doesn't offer a bolt-on application for a cab and chassis truck but they do offer options that could work for you. If your 2000 Ford F350 has the steel flat bed, B&W recommends the #BWGNRK1500. This is a weld-on application. Or,…

Yes, if you already have the B&W Turnoverball Underbed Gooseneck Trailer Hitch part #BWGNRC800 you can purchase just the B&W Turnoverball Gooseneck Custom Installation Kit for Ford part #BWGNRM1111 which would then give you the B&W…

To install the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1300 in the bed of your 1991 Dodge Ram Pickup with an 8 foot bed you will need to align the hitch between the truck bed and the frame of the truck and then you will drill…

A goose neck hitch ball, or the center of a 5th wheel hitch head for that matter, will be located either right over the rear axle or an inch or so forward of it. You do not want a goose neck hitch ball to be located behind the rear axle since this…

I would be happy to help you find a 5th wheel hitch for your 2022 RAM 3500 crew cab chassis. There are a couple of options depending on your preferences. However, both will require welding so not the easiest install. The first option and my…

The only option we have for your cab/chassis is the Reese Low Profile 5th Wheel Trailer Hitch, part #RP30054. This hitch has a 30,000-lb gross towing capacity. Installation of this hitch requires it to be installed directly through a 1/2 inch steel…

You do have the installation of the U-bolt safety chains correct for the Buyers Products 2-5/16" Fabricators Flatbed Gooseneck Hitch #3375613500. I have cut out and added below the section of the instructions for the #3375613500 which details…

A bolt on kit is not available for flat bed use, but a straight-forward solution is a hitch for installation between the rails. You could use the Buyers Product #3375613500, 2-5/16" Fabricators Flatbed Gooseneck Hitch or the B&W #BWGNRK1500,…

If you are having trouble sliding the Curt Double Lock #C60720 rails between the frame and bed of your 2012 Ford F-350, I would not recommend loosening the in-bed bolts; instead, the directions do recommend you cut a notch in the flange on the…

Yes, the Firestone air bag kit #F2703 you have for your 2016 Ford F-250 is compatible with in-bed hitches like the Curt gooseneck part #C60683 that you referenced as well.

The Curt EZr Double Lock #C60683 and the Double Lock #C60720 are essentially the same gooseneck system with some minor differences. Mainly, the EZR sits lower by 3/8" in the truck bed, but it's main draw is that it's designed to be a bit…

There is an underbed gooseneck hitch that is going to work with your 2008 Ford F-250 Super Duty, but the Curt Double Lock #C60720 will not be a fit. Instead, I recommend the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1500 which is…