bing tracking image
Q & A Icon

Replacement Bearings, Races, and Seal for Kodiak Hub


I have a hub stamped “Kodiak rotor /hub -10 “ and it has 5 lugs. I need the bearings ,races and double lip seal for it. Can you tell me which kit will fit? I can measure bearings if I need too. Thanks


Expert Reply:

In order to find the correct wheel bearings, you can take apart your hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them.

If you are unable to find them, you will, as you mentioned, need to measure your spindle where the bearings ride by using a digital caliper such as # 301-17068. You can use the photo I've attached to see exactly where you need to measure.

For a 5-bolt, 10" hub it is likely the bearing kit you need will be # BK2-100, which uses outer bearing # L44649 and outer race # L44610, inner bearing # L68149 and inner race # L68111, along with double lip seal # 58846 though you are going to want to measure to verify.

I've added a link to a video review of this kit as well as link to our selection of bearings, races and seals should you find you need other parts.

click to enlarge
expert reply by:
Kyle S

Products Referenced in This Question

Product Page this Question was Asked From

Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>