Malone DownLoader Kayak Carrier Compatibility With Factory Crossbars On 2016 Jeep Cherokee  

The Malone DownLoader Kayak Carrier with Tie-Downs #MPG114MD is designed to fit round, square, aero, elliptical, and most factory crossbars so it should fit the aero style crossbars on your 2014 Subaru Forester. The Malone AirFlow2 crossbars are…

The rubber strips in the Malone AirFlow2 Roof Rack are supposed to accommodate the T-Slot Fit Kit #MPG8287 by pressing them down. It may be a little tight but they were designed this way to help limit the amount of wind noise that is heard when the…

The top channels of your Volkswagen roof rack are standard size so the Aero bar adapter part #MPG8287 that you referenced will easily fit into them and work with your Malone kayak rack.

In order to use your Malone DownLoader Kayak Carrier #MPG114MD with T-Slot Fit Kit #MPG8287 in the Malone AirFlow2 Roof Rack #MPG216 you will need to remove the rubber stripping (gasket) in the T-slot channel. You can remove, trim, and re-insert the…

The Thule Hullavator Pro #TH898 will work on your 2020 Subaru Outback Wagon but it only has the capabilities of carrying one kayak and there is no way to get two systems on your roof. If you are wanting to carry both of your kayaks at the same time,…

The etrailer J-Style Kayak Carrier part #e98878 will be a great solution! It has a really high capacity compared to the others at 150 lbs. It will also included everything that you need to tie it down. The straps for securing it to the rack, the bow…

While we have an option for you, according to my research an Old Town Sportsman 120 kayak weighs over 80 lbs, which is too heavy for the 75 lb capacity of the Curt J-Style Kayak Carrier #C18320. So what I highly recommend is a different carrier: -…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…