Bracket Recommendation to Replace 20 inch Wide RV Steps with 24 inch Wide RV Steps

Question

Question:

Can I get assistance in how I might install a 24inch wide manual pull-out step onto a rv with formerly a 20inch wide step ?

asked by: Mike M

0

Expert Reply:

Wider steps can be installed on RVs but what you'll have to do most likely is remove the old brackets that steps used and install new Outriggers like part # LC301704 to give the new steps something they can attach to.

expert reply by: Jameson C

0

Answer 1

We don't have an install video but what I can do is describe it. The portion of the #LC301704 with the round holes mounts to the bottom of the frame on your trailer with nuts and bolts or welding. They would need to be spaced at the width of your…

view full answer...

Answer 2

We don't have an install picture but what I can do is describe it. The portion of the #LC301704 with the round holes mounts to the bottom of the frame on your trailer with nuts and bolts or welding. They would need to be spaced at the width of…

view full answer...

Answer 3

The closest RV step we offer to 27 inches in width is the Flexco triple step #SMFP-3200L that measures 27-1/8 inches in total width. You might need the outriggers part #LC301704 to move the brackets out to install the steps if yours is 27 inches…

view full answer...

Answer 4

From the picture you provided it appears you have the Lippert Kwikee 42 Series Double Tread Electric Step #LC372779. Unfortunately, we don't have replacement parts for the steps. Before purchasing make sure the mounting bolt pattern matches.…

view full answer...

Answer 5

We have outriggers like the part #LC301704 which make installing pull out steps like the Lippert Steps part #LC432682 much easier. Your appear to be broken at the weld. The #LC301704 installs with included hardware.

view full answer...

Answer 6

Yes, you can absolutely use the Prest-O-Fit Wraparound Exterior RV Step Rug #PR22FR with your TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear #TLA8102. These wraparound exterior rugs fit straight steps that measure 20" wide and…

view full answer...

Answer 7

It sounds like you need to re-calibrate the zero point on your Lippert Ground Control 3.0 #LC304136 system. Below I've listed out the steps you'll need to follow and will allow you to use the auto leveling again. Zero Point Calibration The…

view full answer...

Answer 8

For Lippert Manual Pull-Out Step #LC432690 the mounting holes are 26-3/8 inches apart on center, side to side, and 7 inches apart on center front to back. The side plates are 16 inches tall. I have included some pictures with these and other…

view full answer...

Answer 9

We do offer teardrop style clearance lights in red, the Pacer Performance Hi-Five Truck Cab Light Kit part #PP20-215 which are sold as a set of five. These lights by law must be installed so that they face the rear of your vehicle. They come with the…

view full answer...

Bracket Recommendation to Replace 20 inch Wide RV Steps with 24 inch Wide RV Steps

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching