Draw Tite Trailer Hitch # 75952 Weight and Install Hardware

Question

Question:

please give links that show a proper description of the parts of this hitch and its own physical weight. TY

asked by: Roger W

1

Helpful Expert Reply:

The weight of the Draw Tite hitch part # 75952 that you referenced is 34 lbs.

I attached a picture that I took from the instructions that shows the hardware that comes with it.

expert reply by: Jameson C

1

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

When choosing the correct trailer hitch to install on your 2023 Nissan Murano there are currently two choices to choose from but are very similar. There is The etrailer Trailer Hitch Receiver #e98907 and then there is The Curt Trailer Hitch Receiver…

view full answer...

Draw Tite Trailer Hitch # 75952 Weight and Install Hardware

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching