What is the Max Tire Pressure for the Kenda Loadstar Tire
Question:
4.80-12 loadstar trailer tire. I need an average tire pressure. Most times two kyaks about 100lbs. Once a year half yard mulch. What pressure can I run without putting a heavy load on?
asked by: Gary C
Expert Reply:
No matter what trailer tire you are using, including the Kenda Loadstar # AM30670, you need to keep the cold psi rating to the what the manufacturer recommends. When you are over or under the recommended pressure then you can cause excessive heat build-up which results in a blowout. Even if it feels like the 990 lbs at 90 psi weight capacity seems like overkill for your trailer this is the best way to maintain your trailer tires.
You should be able to find the 90 psi rating somewhere on the sidewall of the tire.
Product Page this Question was Asked From
Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 4.80-12
- 12 Inch
- 5 on 4-1/2 Inch
- Steel Wheels - Galvanized
- Boat Trailer Wheels
- Kenda
more information >
Continue Researching
- Shop: Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Search Results: loadstar tire
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: 76046
- Search Results: trailer plug mount
- Search Results: 4 pole mount
- Q&A: Can 4.80-12 Size Trailer Tires Be Changed to 4.80-8 Size
- Q&A: Can a 5.7 x 8 Trailer Tire Replace a 4.8 x 8 Tire
- Search Results: ce smith
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Breaking Down the Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel
- Video: A Closer Look at the Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel
- Video: A Closer Look at the Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel
- Video: Install: Draw-Tite Max-Frame Trailer Hitch Receiver on a 2021 Chrysler Pacifica
- Video: Mount: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector on a 2018 Chrysler Pacifica
- Video: 2018 Chrysler Pacifica Draw-Tite Max-Frame Trailer Hitch Receiver: Complete Installation
- Shop: Curt Mounting Bracket for 4-Pole Flat Trailer Connector
- Q&A: Install Picture of Draw Tite Hitch 76046-SK on Chrysler Pacifica
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range B
- Shop: Suspension Enhancement
- Video: An In-Depth Look at the Draw-Tite QSP Trailer Hitch Silencer and Cover for 2" Hitch Receivers
- Q&A: What Tire Pressure Should Trailer with 12 inch Wheels be Ran At
- Q&A: What is Correct Tire Pressure for a 4.80-12 Size Americana Trailer Tire on a Viking Pop Up Camper
- Q&A: Troubleshooting Tire Wear Down Middle of Tread on Trailer
- Shop: Roof Rack
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)