Replacement Mounting Hardware Recommendation for Thule Flat Top Ski Rack  

We do have many parts available for your older Thule Flat Top 724 ski carrier. Here is what we carry as replacements: - Mounting Kit for Thule Flat Top Rooftop Ski and Snowboard Racks #7533998 (will need #THXADAPT7 if your crossbars are over 30mm…

That looks like an older Thule Flat Top ski rack. For a mounting hardware kit that allows it to fit newer style roof racks we have the #7533998 which will work on your 2017 Subaru Outback.

You can use either the Thule 2-Wing Knob #753-1897-03 which came on the Thule 725 Ski Carrier or you can use the Round Nut #853-5439 with the Mounting Kit #7533998 you have. You will need 2 of the knobs or nuts per mount or 4 total for the set.

The Replacement SpeedLink Mounting Hardware Assembly for Thule SnowPack Ski and Snowboard Carriers #7521241001 or the Mounting Kit for Thule Pull Top Rooftop Ski and Snowboard Racks #TH7520970001 will be compatible with the aero style bar. Either of…

There is a way to reuse your existing keys but the Yakima Same Key System (SKS) Lock Cores #Y07202 cannot be ordered to match your keys. What you would need to do is order single lock cores that match your keys. For example, if your key had a number…

Yes, the adapter part #7533998 will fit your first generation Thule Flat Top ski carrier and will fit on the new Thule Wingbar Evo crossbar.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

Hello Reyes; at this time (September 2024) there are no Rhino-Rack roof racks confirmed to fit your 2024 GMC Acadia AT4. The only roof racks we have that are confirmed to fit your raised rails are from Malone like the AirFlow2 #MAL74AR or #MPG215.

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

Hey Cathy, sweet camper! I really like the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-500B-ST you were looking at because it's a tried-and-true solution that also gives you tracks so you can accommodate a variety of different load…