bing tracking image
Q & A Icon

Lighting and Wiring Options for Flat-Towing a Jeep Wrangler Behind a Motor Home  


I just wanted to make sure before ordering this that it is correct. Im towing my jeep behind motorhome and I want the rear tail lights, blinkers, stop lts work from the motorhome connection. Thanks


Expert Reply:

What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, # 42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed.

There are a few options for lighting when flat-towing a vehicle. I have included an FAQ article that covers the various options. What it boils down to is how often you will be towing the Jeep behind the motor home.

If you do not plan on towing it very often, the best way to go would be a magnetic light kit, # RM-2120.

If you will be towing frequently there are 2 options. You can use a separate bulb kit, like # RM-155, or you can wire the Jeep with diodes using # RM-154. These are considered long term, permanent lighting solutions. The installation is more time consuming and involved but you will only have to do it once. I have included a link to a video showing a typical diode installation.

I have also included a link to our series of FAQ articles on flat towing that contain a lot of helpful information.

expert reply by:

Products Referenced in This Question

Product Page this Question was Asked From

Q & A Icon

Continue Researching

See More Q&A Expert Answers >>