Diameter of Snapper Pin of Curt Pintle Hook # C48215  

For a pintle hook with a 30k capacity that is designed to bolt on to a mounting plate like the part #63057 we have the part #C48215 which would work well. You didn't say how you would attach the hook but this would work well.

If the nose of your trailer is nose down when hooked up to your vehicle it will cause additional tongue weight on the hitch which could in theory lower your fuel economy, but I do not have an exact figure. As long as the extra tongue weight on the…

The Buyers Products 2" Pintle Hook Mount #337PM1012 is 11-1/2" from the mounting face to the edge of the receiver pin mount.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

We aren't manufacturers of those parts, and we don't have the testing ability in house, so I reached out to a couple of our manufacturers to see what information they could provide to try and help. I reached out to my contact at Curt…