Question:
how can i remove the stock sealant from the old vent fan without ripping the rubber roof, its looks like it was poured on at the place it was made..
asked by: Steve O
Helpful Expert Reply:
Some people have used a veneer knife with or without teeth. If it does have teeth make sure the teeth are not offset (one tooth pointed left and the next pointed right and so on) otherwise it can damage the rubber roof. Flat blade or blade with teeth with all teeth leaning the same direction.
Some say not to remove it at all and instead use a product called Eternabond (we do not have this product). caulk generally comes off pretty easy once you get it started so I would start with the knife and go from there.
TremPro 644 Silicone Sealant - 10.1-Fl-Oz Cartridge - White
