Recommended Timbren Heavy-Duty Axle-Less Trailer Suspension for an Off-Road Trailer

Question:

I need to know how much of a drop is needed for my off road tear project. The current axle is about 3ish inches from center of pinion to lower frame. I dont want to really go any taller or the trailer gets to be too tall. I have pics of measurements if that helps. The product I was looking at is #ASR2KHDS03.

asked by: Aaron

Expert Reply:

The distance from the center of the spindle to the bottom of the frame rail with the Timbren Heavy-Duty Axle-Less Trailer Suspension part # ASR2KHDS03 is 7-1/2". If you only have 3" from the center of the spindle to the bottom of the frame rail on your existing setup then you are going to want to use the Timbren Heavy-Duty Axle-Less Trailer Suspension part # ASR2KHDS02 which has a distance from the center of the spindle to the bottom of the frame rail of 3-13/16" which is the closest option we have to what is on your trailer now.

I have attached a photo that shows the above dimensions for you as well.

expert reply by: Conner L