Is an Equal-i-zer Weight Distribution System Head Compatible with the Gen-Y Hitch # 325-GH-1102
Question:
Hello, can you tell me for sure if the equalizer wd head will fit on the gen y wd shank 2014 F250 with 2-1/2” hitch Already have the equalizer wd system just want to upgrade to the gen y shank Thanks
asked by: Jason
Expert Reply:
Most weight distribution systems mount on shanks that are 2" wide and have mounting holes that measure 1-1/4" apart on center.
I spoke with my contact at Gen-Y Hitch who confirmed that the Torsion Weight Distribution Shank for 2-1/2" Hitch # 325-GH-1102 does have the standard width of 2" for the head and mounting holes 1-1/4" apart on center. If you are using a weight distribution head from Equal-i-zer like part # EQ90-02-1000 then they are compatible with each other.
Products Referenced in This Question
Replacement Head for Equal-i-zer Weight Distribution Systems - 1,000 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Head
- Square Bar
- Equal-i-zer
- Equal-i-zer
more information >
Product Page this Question was Asked From
Gen-Y Torsion Weight Distribution Shank - 2-1/2" Hitches - 6-1/2" Drop/Rise - 1,700 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2-1/2 Inch Hitch
- Round - 6 Inch Drop
- Square - 6 Inch Drop
- Trunnion - 6 Inch Drop
- Round - 6 Inch Rise
- Square - 6 Inch Rise
- Trunnion - 6 Inch Rise
- Gen-Y Hitch
more information >
Similar Expert Q&A Pages
- Does Curt TruTrack 1,500 lb Weight Distribution Fit Gen-Y Torsion Weight Distribution Shank
- What Does Gen-Y Torsion Weight Distribution Shank 325-GH-1102 Weigh
- Cushioned Weight Distribution 2.5 inch Shank Solution for Ram 2500
- Distance Between Hitch Pin Hole and Mounting Holes on Gen-Y WD Shank # 325-GH-1102
- Cushioned Weight Distribution Shank that Can be Used with 2022 Ram 2500 2.5 inch Hitch
- Can Gen-Y Weight Distribution Shank be Used with Reese Steadi Flex Weight Distribution
- Can 2-5/16 inch Hitch Ball be Used with Gen-Y Torsion Weight Distribution Cushioned Shank
- Is Gen-Y Cushioned Weight Distribution Shank Compatible with Reese Steadi Flex Weight Distribution
- Recommended Gen-Y Torsion Weight Distribution Shank for a Husky Centerline System
- Replacement Hitch Head for Reese Straight-Line 17K Weight Distribution System
- Gen-Y Weight Distribution Shanks for Blue Ox Weight Distribution Systems
- Cushioned Shank For Use With Equal-i-zer Weight Distribution System
- Can Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers Be Used With Weight Distribution
- Best 2-1/2 Inch Gen-Y Shank for a Weight Distribution System
- Weight Distribution Hitch For a 2020 Forest River Cherokee Being Pulled By a 2020 Ford F-250
- Weight Distribution Shank that Fits 2.5 inch Hitch and Reese Strait Line RP66074
- Weight Distribution Hitch System For a 2021 Ford F-250 With Slide In Camper And 1,500LB Hitch Weight
- Does Gen-Y Offer Weight Distribution System Shanks that Use Torsion Cushioning
- Recommended Weight Distribution System for 1600 lb Tongue Weight
- Recommended Weight Distribution System and Sway Bar for 3 Horse Trailer
- Will Blue Ox Sway Pro Weight Distribution Fit Gen-Y Torsion Weight Distribution Shanks
- Does Reese Stait-Line Weight Distribution Work With Underslung Couplers
- What is Max Drop of Gen-Y Torsion 2-Ball Mount and Can be Used with Weight Distribution
- Availability of 2-1/2" Weight Distribution Shank That is 12" Long for Fastway System
- Cushioned Gen-Y Weight Distribution Shank that Works with Husky CenterLine System
- Replacement 2-1/2-Inch Weight Distribution Shank for Husky Center Line TS WD Hitch