Replacement Grease Seal for 4400-lb Lippert Trailer Axle
Question:
Looking for grease seals for a lippert 4400 axle
asked by: Guy G
0
Expert Reply:
For a 4400-lb Lippert axle the most popular grease seal is part # 58846. This is a double-lip grease seal with an inside diameter of 1.719-inches and an outside diameter of 2.565-inches. This seal is often used along with inner wheel bearing # L68149 and outer bearing # LM67048.
expert reply by: Adam R
0
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Trailer Hub Bearing Kit for 2019 Flagstaff Super Lite 26RLSW Dexter 3722505 Axle 4k
- Replacement for Dexter Drum 8-283
- Grease Seal and Bearings Recommendation for 5200 lb Lippert Axle
- Replacement Bearings for Dexter 3000 lb Trailer Axle
- Replacement Bearings And Seals For A 2019 Grand Design 2970RL With Dexter 4.4K Axles
- Trailer Idler Hub That Uses a LM67048 Bearing and Has a 5 on 4-1/2 Inch Bolt Pattern
- Bearing Replacements for L68149 and LM67048
- Replacement Hubs for Old Trailer That Uses Inner and Outer Bearing LM67048
- Which Bearings, Races, and Seal Fit Dexter Hubs 8-283
- Replacement Outer Bearing and How to Determine the Correct Inner Bearing Seal
- Replacement Bearings and Seals Based On Printed Number On Face Of Bearing
- Replacement Bearings and Seals for Dexter 3,000 lb Torflex Axle
- What Spindle is Needed for LM67048 Inner and LM11949 Outer Bearings
- Bearing Kit with LM67048 and L44649 Bearings
- Trailer Hub that Uses Bearing # LM67048 for Inner and Outer
- Bearing Replacements for Trailer with L44610 L44619 L68111 L68149 442251
- Trailer Bearing Availability with Inner Diameter of .75 inch and 1.25 inch
- Determining The Correct Replacement Bearings And Grease Seal For Lippert 5200lb Axle
- Can Two Different Hubs that Use the Different Bearings Be Used on Same Trailer Axle
- Replacement Hub That Uses Bearing Set LM102949 Inner Bearing and # LM67048 Outer Bearing
- How to Pick Out Bearings for Harbor Freight Trailer
- Trailer Bearing Available with Inner Diameter of 1.25 inches
- Replacement hub Parts for 3,000 lb Dexter Axle With Bearings LM67048 and L44649
- New Spindles, Hubs, Tires, and Wheels for a Canoga Concrete Mixer/Trailer
- Replacement Bearing, Seals, and Races for ShoreLandr Boat Trailer
- Do Brake Pads on Both Sides of a Trailer Axle with Disc Brakes Need to Be Replaced at the Same Time
- Inner & Outer Bearings For Lippert 5,200 lb Axle
- What Hub/Drum Bearings, and Grease Seals do I Need for My 3k Axle with 5 on 4-1/2 Bolt Pattern?
- Is There Hub With 6 on 5-1/2 Bolt Pattern, L68149 Inner Bearing & LM67048 Outer Bearing
Follow up Questions
I have a 2020 Grand design 260RD with Dexter 4400 LB axels. #776322. I am trying to verify the proper complete bearing kit. The kit I found is K71-718-00 Item # 95036. Is this the correct kit for my model? 124813
@GeraldM I would like to help you with this but I need a little more information. I need the axle serial number. It is a 9 digit number engraved on the axle. You might also find it on a sticker on the axle. 81981
@LesD S/N 132176458 82000
For your trailer with Dexter axles rated for 4400 pounds and an axle serial number of 132176458, I did not see a kit. You will need the following bearing hub parts: Inner Bearing Cone (Dexter 031-033-02) L68149 Inner Bearing Cup/Race (Dexter 031-033-01) L68111 Outer Bearing Cup/Race (Dexter 031-032-01) LM67010 Outer Bearing Cone (Dexter 031-032-02) LM67048 82144