5th Wheel Trailer Hitches for a 2018 Ford F-250 4x4 Both with and without Factory Prep Package

Question

Question:

Everything Ive read tells me or new truck comes with the necessary equipment to tow a fifth wheel, minus the gooseneck. My husband tells me it wasnt factory installed. How can I determine if its there or not.

asked by: Victoria

0

Expert Reply:

On your 2018 Ford F-250 4x4 look in the bed. If you see the 4 pucks in the bed like in the picture I have included then you do have the factory 5th wheel prep package. If you just see the indentations where the pucks would be then you do not have the prep package.

If you do have those pucks then you can use a hitch that mounts directly in them. For a long bed truck you can use the following:

# BWRVK3305
# C16036
# RP30922
# DM8550033

If you have the prep package and a short bed truck you can use one of these sliders:

# DM8550038
# BWRVK3370
# C16545-16020
# RP30144

For the above 2 lists there are other hitches that also fit but I ran out of space in the parts links (below). But all of the options can be seen by going through our fit guide.

If you do NOT have the puck system then you can install an underbed mount kit that is similar but it will be specific to the related hitch. For example for a short bed you can install B&W system # BWGNRK1116-5W and then you would need slider # BWRVK3400-5W. Or you could go with Demco kit # DM8551009 and an auto-sliding hitch # DM8550022.

For a long bed you could use the same B&W kit # BWGNRK1116-5W but with a fixed hitch, # BWRVK3500-5W. Or you could go with the Demco kit # DM8551009 and fixed hitch # DM8550032.

expert reply by: Michael H

0

click to enlarge

Answer 1

We have a similar Pace Edwards retractable tonneau cover that can retract at 12 inch increments but the Switchblade part #PE66QJ can only be either all the way open or all the way closed. Instead you'd want the Full Metal Jacket part #PE89QJ…

view full answer...

Answer 2

I would stick with a roll-up tonneau cover. A tri-fold option may not be able to access your 5th wheel hitch without folding it completely. A roll-up tonneau cover, or retractable, is preferable because you can still access the B&W 5th wheel…

view full answer...

Answer 3

The Pace Edwards Switchblade #PE66QJ weighs a total of 82 lb.

view full answer...

Answer 4

The weight of the Pace Edwards Switchblade #PE66QJ is 68 pounds. As far as as your question about the height of the cover installed on the side rails, it sits just shy of 1/8 of an inch. With this measurement, it truly depends on the height of your…

view full answer...

Answer 5

The canister on the #PE66QJ measures 9-3/4" front to back. The overall dimensions are 9-1/4" tall x 9-3/4" deep.

view full answer...

Answer 6

Yes, it is possible to change out the B&W Companion OEM 5th Wheel Hitch part #BWRVK3305 for the Curt A20 5th Wheel Trailer Hitch part #C16034 as this would then lower the hitch head height up to 3-3/4". However, you will still need to…

view full answer...

Answer 7

For your 2018 Ford F-350 with the factory fifth wheel rail kit towing a 24,000 lb trailer the B&W Companion OEM 5th Wheel Hitch #BWRVK3305 that you referenced is definitely your best option. It has a 25k capacity so it will easily handle the…

view full answer...

Answer 8

Pace Edwards only has their fitments listed up to 2022 so I recommend reaching out to your local Ford dealership to determine if there were any changes to beds between 2022 and 2023. If not, then the Pace Edwards Switchblade Retractable Hard Tonneau…

view full answer...

Answer 9

Your truck is actually only rated for towing up to 18,000 lbs so even if we could get you a rail kit with a higher capacity you still would need to stay under 18,000 lbs to be safe. The B&W Companion OEM 5th Wheel Hitch for Ford Super Duty Prep…

view full answer...

Answer 10

The Extang Solid Fold 2.0 Hard Tonneau Cover - Toolbox Edition #EX84488 sits on top of the bed rails of your 2022 Ford F-350 Super Duty 8' bed so if your 5th wheel hitch sits below the top of your bed rails this will physically fit in that…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

5th Wheel Trailer Hitches for a 2018 Ford F-250 4x4 Both with and without Factory Prep Package

Products Referenced in This Question

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching