Fastway Flash E Series Adjustable 2-Ball Mount for 2-Inch Hitch  

The capacity for the lock set part number #FA86-00-3660 that you referenced is going to be the max capacity the ball mounts these are designed for have. That would be 10,000 lbs total trailer weight and 1,000 lbs tongue weight.

From the top of the shank to the bottom ball on adjustable ball mount #FA42-00-2800 in it's lowest position is approximately 13 inches.

On the Flash E Series Adjustable 2-Ball Mount w Chrome Balls - 2" Hitch - 8" Drop, 9" Rise #FA42-00-2800, the measurement from the center of the hitch pin hole to the center of the ball is 8-1/2 inches. I am including a picture that…

The Flash E Series Adjustable 2-Ball Mount w Chrome Balls #FA42-00-2800 has a 5/8 inch pin hole diameter. I believe you will be able to use the Fastway Trailer Hitch Lock and Adjustment Pin Lock Set for Flash E Series Ball Mounts #FA86-00-3660 for a…

The hitch balls on the Flash E Series Adjustable Ball Mount, #FA42-00-2800, will rattle somewhat in the ball mount when not towing. The rattle is due to the shank of the hitch ball being narrower than the mounting slot on the shank of the ball mount.…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

From the top of the B and W Tow and Stow part #BWTS10043B down to the bottom of the unused ball when it is in it's lowest position measures 14 inches. The 7 inch drop version part #BWTS10040B instead has this distance at 12 inches.

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…

The B&W Tow and Stow ball mount #BWTS10049B will have some great features. You can stow the mounting platform that has the 3 hitch balls (1-7/8, 2, and 2-5/16 inch) underneath your vehicle. This is nice because you will eliminate the possibility…