Will the SolidStep Manual Fold-Down Steps Fit a 29 Wide Doorway  

The third generation (3.0) SolidStep Manual Fold-Down Steps are what we currently have in stock and the ones you will receive. The review video you are referring to on the second generation (2.0) was carried over to the product page for the third…

According to my calculations the distance from the center of the pin hole to the far end of the shank on Curt combo bar #E-9 is 3-1/2 inches. The bar is 6 inches long overall so from the center to the face of the receiver is 2-1/2 inches.

The SolidStep Manual Fold-Down Steps #LC791575 do not require a lip on the threshold. They will work well with or without a lip as the mounting is flush and the hinge is a minimal rise. I've attached a video to assist so you can see the minimal…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

The fuse for the Go Power PWM Solar Charge Controller #GP76QR is not located on the controller itself. It should be inline on the wire running from the controllers positive port to the battery.