Troubleshooting Wiring on 2013 Honda Odyssey
Question:
Hello, I installed the wiring harness on my 2013 Honda Odyssey and recently purchased a boat. The trailer lights don't work so I started by testing the voltage across my 4-pin harness connection. The res voltage to the main but not to the right or left. I have new fuses and Slots 2, 8, and 11 as instructed to do. Any thoughts on what the problem could be? I appreciate your help!
asked by: Jon W
Expert Reply:
If you used a circuit tester such as # PTW2993 to check the signals going into the converter box of wiring harness # C56378 and there is no voltage, quickly double check to ensure that the plug-in connectors are secure. Try unplugging them and then plugging them back in. Also take a look at the wires themselves to make certain they aren't crimped, broken or damaged in any real way. In very rare cases, the converter box could be bad, and you would need to replace the unit.
Products Referenced in This Question
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt LED 4-Way Flat Connector (Vehicle End) Tester
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: 7-Way Recommendation for 2013 Honda Odyssey
- Q&A: Is Transmission Cooler Required After Adding Trailer Hitch Receiver # C13068 to 2013 Honda Odyssey
- Q&A: Trailer Hitch and Wiring Recommendation for 2013 Honda Odyssey
- Video: Curt T-Connector Vehicle Wiring Harnes Installation - 2013 Honda Odyssey
- Video: Set up: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector on a 2013 Honda Odyssey
- Video: Let’s Check Out the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Video: 2011 Honda Odyssey Derale Dyno-Cool Tube-Fin Transmission Cooler Kit: Complete Installation
- Q&A: Trailer Stop and Turn Signals Stop Working On 2012 Honda Odyssey
- Q&A: Trailer Running Lights Not Working When Connected to 2012 Honda Odyssey with Curt Wiring Harness
- Q&A: Troubleshooting Curt Trailer Wiring Harness on 2012 Honda Odyssey
- Q&A: Troubleshooting Trailer Right Stop/Turn Signal not Functioning on a 2011 Honda Odyssey 4-Way
- Shop: Transmission Cooler
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Finding the Right Trailer Wiring Harness
- Search Results: trailer hitch
- Search Results: trailer wiring
- Shop: Brake Controller
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Article: Trailer Wiring Diagrams
- Shop: Suspension Enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: hitch
on Wiring
