Question:
I have a 2012 Escapr XLT with a fatory 1.25inch hitch and want to install a Draw Tite 75751 2inch hitch. Can it be accomplished with the factory hitch still in place?
asked by: Jerry
Expert Reply:
The item you referenced, Draw-Tite Trailer Hitch, part # 75751, will fit the 2012 Ford Escape models with factory 1-1/4 inch hitch. You will not need to remove the factory hitch to install the # 75751 hitch.
To complete your towing setup, you may need the following:
Ball Mount, part # 2923
2 Inch Hitch Ball, part # 19258
Pin and Clip, part # PC3
For wiring, if your Escape has backup sensors you will need to use T-One Vehicle Wiring Harness, part # 118551. If your Escape is equipped with a tow package, you will need to use Draw-Tite Custom Fit Vehicle Wiring, part # 118251.
I have linked a video installation of the Draw-Tite Trailer Hitch, part # 75693 on a 2009 Ford Escape as the installation should be the same. Also linked is an FAQ on trailer hitch installation tips.
Tow Package Wiring Harness with 4 Pole Trailer Connector
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
