How to Determine Correct Replacement Vent Cover with Unknown Vent Brand  

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

To determine which replacement lid you need you will need to check the hinge on the roof of your vent lid. I have included an chart that has the most common lids and shows the hinges. Once you identify the hinge you will need one of the following…

I was able to find you in our records and it looks like you bought the (three point hinge) part #69284 back in 2015 which is discontinued. The new replacement part is #CAM40153.

We have a large selection of replacement lids for RV roof vents available. In order to pick out the correct replacement for your vent, you will first want to measure the vent itself. Most standard vents are 14 x 14 inches in size and fit into an…

Yes, due the the unique design of the MaxxFan Deluxe Roof Vent #MA00-07500K it can be left open while travelling. If you don't have the fan running while it's open the powered lift will close so if you plan on just having it open to vent…

The Hengs lids we offer do not have continuous metal hinges but we do have a few that do have that hinge style like the #CAM40161 which is a white polycarbonate lid.

We carry replacement lids for Elixir RV Roof Vents that have the appropriate hinge, which is what I believe you are asking about; the hinge on these lids are not available as a separate entity, however. The replacement lid for your roof vent will be…

The key to picking out a replacement lid for a standard 14 x 14-inch trailer roof vent is matching the hinge type. Trailer makers typically don't keep track of smaller items like vents that are used in fabrication of their trailers so you can…

You will want to look at the size and the hinge style when looking for a replacement vent lid. There are different styles of a continuous hinge. If you can snap a pic of the existing hinge on the vent or lid and email that to me I can point out the…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…