Can Multiple RV Sewer Drain Hoses Be Connected Together  

Yes, the over-under kit, part #K71-384-00, does fit a 2-3/8 inch Lippert axle as well. It fits any 2-3/8 diameter round axle with a double-eye leaf spring suspension. Also yes, Lippert axles also have a bow in them that needs to face upwards. I…

Yes, the spring width would matter when using the Dexter Over Under kit part #K71-384-00 that you referenced. If you check out the picture I attached you'll see that if the spring was too wide the u-bolt holes of the plate wouldn't fit around…

We do have some products that will work to join to sewer hoses together but not one that uses lugs on both sides. What we do have are the threaded adapter #F02-3102 and a non-threaded, similar version #CAM39203. I have linked videos on both parts for…

The Camco RhinoEXTREME part #CAM39861 is a high quality sewer hose. This is ranked up there with the highest quality hoses and I wouldn't recommend anything over it. Our customers have reviewed this very highly as well. The 90 degree elbow you…

The Buyers Products SuperTrack Kit #337ST93 comes with four 46-1/2 inch long rails. They only sell them as a pack of four and you can't buy them individually. If you're wanting to make them a big shorter I would just go ahead and cut them. I…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…