Do Trailer Brake Magnets Need to be Tested Under Load?
Question:
Are these trailer brakes supposed to be tested under a load or just empty trailer?
asked by: Gary W
0
Expert Reply:
I believe you are asking about testing brake magnets as displayed in the linked help article; you do not need to have a loaded trailer to do so. You will be just fine testing them with an empty trailer.
expert reply by: Kyle S
0
Product Page this Question was Asked From
Replacement Magnet Kit for 7" Electric Trailer Brake Assemblies - 2,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- 2000 lbs
- Brake Magnets
- 7 Inch
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Replacement Electric Brake Magnet for 2,000 lb Axle
- Will Trailer Brake Magnets # AKBRKR-M7 Replace Dexter Magnets K71-057-00
- Replacement Brake Magnet and Tire/Wheel Combo for a 1964 Shasta Compact Camper
- How to Test Trailer Brake Magnets on a 2005 Aliner Sport Trailer
- Replacement Brake Magnet for Dexter # K71-050-00
- What Size Butt Connectors Are Needed To Install a Brake Magnet for 7 Inch Brakes
- Troubleshooting Intermittent Brake Controller Functioning
- What Ohms Should Trailer Brake Magnets Be?
- Do 7 Inch Electric Brakes 23-47-48 And AKEBRK-2 Y Use Same Magnet Retainer Clips
- Should Brake Magnet Chatter if Retaining Clip is Broken
- Replacement 7 inch Brake Assembly for Fiat Elnagh 320 Motorhome
- Replacement Dexter Trailer Brake Magnets for 10 Inch Assembly
- Comparing Replacement Magnet Kit for 7" Electric Trailer Brake Assemblies BP01-068 and AKBRKR-M7
- Replacement Magnet Kit For Electric Trailer Brake Assembly For 2,000-lb Axle
- What Does Brake Controller Look for To Sense a Trailer Connection