bing tracking image
Q & A Icon

Replacement Scissor Jack for a 2017 Rpod 179 Hood River Edition


I have an early 2017 R Pod, model 179, Hood River edition. I trashed one of my stabilizer scissor jacks. I can’t find a part number anywhere that lets me know what jack to order for a replacement. Do you know which jack my rig takes? Is there one you would recommend? Current ones are 24” long...not sure of capacity. Brackets are both bolted and spot welded to frame. Screw holes are 2 ½ apart on center. Thanks for any help.


Helpful Expert Reply:

While I do not know which specific jack make and model came on your Rpod originally you can install pretty much any other similar jack, such as Ram Scissor Stabilizer Jack # TJSC-24, as a replacement. The mounting holes likely will not perfectly line up but it wouldn't take much effort to add a new hole or two to properly install the jack. Since the original was also welded I do recommend doing the same with the new jack. Any welding should be done by a professional welder.

helpful expert reply by:

Products Referenced in This Question

Product Page this Question was Asked From

Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>