What Size Trailer Frame Will the Replacement Weight Distribution Chain Hangers Fit On  

If you can't place any weight on the trailer in any way that limits a lot of the options. Basically you'd have to decide if you could fit in in the interior or use a bunk like part #CC-255 as a platform on the tongue of the trailer. This is…

Hello Floyd, we can indeed provide the parts you mentioned. Take a look at the following: - Replacement Ball-Plate Assembly for Reese Friction Sway-Control System #RP58062 - Replacement Lift Brackets with Handle for Reese Weight Distribution Systems…

Hi there Ryan; thanks for the question and the easiest weight distribution hitch to connect and disconnect after initial set up is the B&W Continuum, with the right one for your 2-1/2" hitch being the following: - B&W Continuum Weight…

Yes, the lift brackets part #RP6637 and the chain part #3216 would work with the Pro Series RB3 weight distribution part #PS49582 that you have.

The Pro Series V-5 Hitch 113913 is an older weight distribution system that is not available anymore and has limited replacement parts. It uses the Pro Series RB2 item #58333 head and the only available replacement spring bar is the Replacement Round…

The Reese round bar weight distribution systems and Pro Series round bar systems are fundamentally different and the parts are not interchangeable. For a Reese round bar system use head #RP58112. For a Pro Series round bar system use head #PS58442.

No worries. We carry trailer roof vent replacement lids and lots of other vent parts so we can get you squared away before the spring thaw. Most square trailer roof vents are 14 x 14-inch and the main thing to note on your original vent lid is the…

In order to determine what vent cover replacement is needed for your 2008 Keystone Hideout Travel Trailer you will just need to identify the hinge type. For example, if you have a closed continuous hinge, you can use the Metal Low Profile Replacement…