bing tracking image
Q & A Icon

Lippert SolidStep RV Step Kit Recommendation for 2017 Rockwood ROO 233


I have a 2017 Rockwood ROO 233s do you measure inside door opening at the flange where the door stops or just the opening. My measurement just inside the door opening is 25 1/2 and height from the ground to the threshold is 27 on one side of the door and 27 3/8 on the other. Also does the inside threshold height to the floor matter like it does on MORryde steps I have 1/2 inch threshold height from the floor and MORryde steps needed 5/8 to 3/4 inch so the door wouldn’t close so what solid step will work if any thanks for the help


Helpful Expert Reply:

The opening of the door and the threshold height are the two dimensions you need to pick out the correct Lippert Solidstep. Based on your doorway width of 25-1/2 inches and the threshold height of 27 inches the kit you need is the part # LC791572 which fits that perfectly. This will fit with the other threshold dimension you mentioned as well.

helpful expert reply by:
Jameson C

Product Page this Question was Asked From

Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>