What Size Adjustment Pin Is Needed for the Flash E Series Adjustable Ball Mount  

That hitch does stick out pretty far on your 2021 Nissan Rogue! I can certainly understand wanting something a bit more recessed. We have the Curt hitch #C24HR which is much more recessed like you can see in the picture I attached. I could be wrong…

On the Rapid Hitch Adjustable, Aluminum Ball Mount #AM3461 there is that pin on the ball part of the assembly that has a threaded hole in it. That threaded hole should be visible when the pin is in there correctly. You can use a 1/4 inch screw or…

There is an aluminum ball mount that will allow you to use both 1-7/8" and 2-5/16" hitch balls, but since there isn't a combo ball with those sizes together, you'd have to get the 1-7/8" ball separately. So you have two options…

The capacity for the lock set part number #FA86-00-3660 that you referenced is going to be the max capacity the ball mounts these are designed for have. That would be 10,000 lbs total trailer weight and 1,000 lbs tongue weight.

So the answer to the exact adjustable ball mount you need really depends on the amount of rise or drop you require. If you aren't sure how to measure for that, I've added a link to a help article detailing how to determine that. With that in…

To get an aluminum adjustable ball mount that can have a 1-7/8 inch ball on it you would need to replace the balls of the # FA42-00-2400 with the part #DTBM23 and then you would have a 1-7/8 inch ball and a 2 inch ball.

Well, it worked! I even had another guy come over and give it a read. It is possible that the many years of pushing and pulling on your balls have enlarged the hole they fit in causing the movement you are experiencing. You could disassemble the big…

The closest option we have available to what you are needing is the Blue Ox Trailer Hitch Receiver Lock item #BX88212. This heavy-duty lock features a 5/8" diameter and a usable length of 4-3/8". This usable length represents the longest…

The Rapid Hitch Adjustable Aluminum Ball Mount you referenced, part #AM3410, actually has two hitch pin holes. I pulled one off of the shelf and made the following measurements. The distance from the closest hole to the rear of the ball assembly is…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…