Jayco Jay Flight 26BHS Axle Capacity
Question:
Jayco Jay Flight 26BHS - The frame has 5,000lb stamped in the a-frame, but the axle diameter appears to be 2.5 and the diameter of the brake drum is 10 with 6 lugs. That number may just be for the tongue. The sticker on the trailer was painted over by the previous owner. That does not seem to jive. Looking to replace the electric brakes with a kit and want to make sure I am getting the correct ones. Guessing they are 3,500lb axles. Thanks!
asked by: Jeremy
Expert Reply:
I took a look at the specs for the Jayco Jay Flight 26BHS and based on that and the photo you sent in (thank you for that) it does have two 3,500 lb axles.
Since you have a 10 inch drum the Electric Trailer Brake Kit # AKEBRK-35-SA, which is for 3,500 lb axles, will work so long as you also have a 4-bolt mounting flange. These brakes are 10" diameter x 2-1/4" wide so also be sure your drum has that width and you'll be set.
The only other thing you will need is the Mounting Hardware for 10" Brake Assemblies # BRKH10B.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Mounting Hardware for 10" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 10 Inch
- ABS Fasteners
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- 18 Inch Wheel
- 18-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: How to Measure a Trailer Spindle
- Q&A: Bearings For Older Trailer Hub 22834
- Q&A: Can You Install an EZ Lube Hub and Drum on a Non EZ Lube Axle
- Q&A: How to Pick Out Replacement Grease Seals for Hadco 3122
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Q&A: Finding a Hub for a Very Old Trailer with 6 Lug Bolt Pattern # 1779 inner and # 2788 Outer Bearings
- Q&A: Dimensions of the Titan Cast Iron Slip-On Hydraulic Drum Brake Assembly
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Measure a Trailer Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Best Bike Racks for Electric Bikes
- Article: Rolling on a Budget: Top Wallet-Friendly Platform Bike Racks
- Article: Trailer Wiring Diagrams