Inner Dimensions of the Pin Locks for TorkLift FastGun and Derringer Turnbuckle Handles # TLS9500

Question

Question:

I see they are 1/4 inch diameter pins. In the locked form ,what is the space between locking apparatus ? I have happijac turnbuckles and am interested in purchasing locks. they also have 1/4 inch hole. the width is 1 1/8 inch Thanks.

asked by: Garry F

1

Helpful Expert Reply:

I went out to the warehouse and measured the single unit # TL11001 of the Pin Locks # TLS9500 that you referenced and found the width to be 1-7/16" but to the rubber grommet measured 1-1/4". If you need 1-1/8" of space then these will work for your application.

expert reply by: Jon G

1

click to enlarge

Answer 1

The distance between bolts on the HappiJac #LC182496 Jack System, measured center-on-center is 7-1/4" inches and 17" overall length. I have attached a drawing with measurements.

view full answer...

Answer 2

The main difference between the Torklift Locking FastGun Turnbuckles, #TLS9522-2-LK, and the AnchorGuard Derringer Turnbuckles, #TLS9020, is how the camper tie-downs are mounted on your truck. The FastGun #TLS9522-2-LK are designed to be used with…

view full answer...

Answer 3

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

view full answer...

Answer 4

Hey Jason, thanks for reaching out! We have a TorkLift tie-down kit for your 2022 Ford F-350 just as long as the electric running boards aren't wheel-to-wheel (I don't believe they are). The kit you referenced is for newer Super Duty pickups,…

view full answer...

Answer 5

HappiJac hasn't really developed a great solution for licking their turnbuckles yet. There are some options, but it also depends on what HappiJac turnbuckles that you have. If you have the HappiJac Qwik-Load Turnbuckles #LC182895, you would just…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

Hey Bob, the Torklift Talon tie downs part #TL73QR weighs 35 lb. The TorkLift Talon Camper Tie-Downs #TL44XR weigh 26 lb. TorkLift Locking FastGun Turnbuckles #TLS9529-2-LK weighs 20 lb.

view full answer...

Answer 8

The hardware is not included so it does need to be purchased separately for the Brophy Tailgate Scissor Step Mounting Bracket #TSSB. Brophy does not sell the hardware to go with it, so you will need to get it locally at a hardware store, and it is…

view full answer...

Answer 9

Your 2018 Ford F-350 is a Cab and Chassis model and not a Super Duty. For this you will need to use the Firestone Ride-Rite Air Helper Springs #F2176 as long as you have 7-1/2" between your frame and the inside of the tires. The Air Lift…

view full answer...

Answer 10

The Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle #F35FV are not the style with the integrated jounce springs but they do install in the same location as the factory jounce. The #F2600 will fit a 2019 F-350 but only the 2WD…

view full answer...

Inner Dimensions of the Pin Locks for TorkLift FastGun and Derringer Turnbuckle Handles # TLS9500

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching