How Many Washer to Use When Installing Yates Ribbed Wobble Roller YR500YW-8PEZ
Question:
It seems using a washer on both inside and outside of the roller would work better but there is not enough room for 2 washers. So does the washer go on the in side or the out side of the roller?
asked by: DOn
0
Expert Reply:
If you do not have enough space to install two of the CE Smith Wobble Roller Washer # CE10982 when mounting your Yates Ribbed Wobble Roller # YR500YW-8PEZ you can use just one on the outside of each roller, or if you wish you might be able to locally source thinner galvanized washers with a 1-1/8-inch center hole that allow you to place one on each side.
expert reply by: Adam R
0
Products Referenced in This Question
CE Smith Wobble Roller Washer for 1-1/8" Shaft - Zinc-Plated Steel - Qty 1
- Accessories and Parts
- Boat Trailer Parts
- Trailer Hitch
- Trailer Leaf Spring Suspension
- Weight Distribution Hitch
- Hardware
- 1-1/8 Inch Diameter
- Washers
- CE Smith
more information >
Product Page this Question was Asked From
Yates Ribbed Wobble Roller for EZ Loader Boat Trailers - TPR - 1" Shaft
- Boat Trailer Parts
- Roller and Bunk Parts
- Rollers
- 5 Inch Diameter
- Wobble Roller
- Thermoplastic - Non-Marking
- Fits 1 Inch Shaft
- Yates Rubber
more information >
Similar Expert Q&A Pages
- Can Yates Ribbed Wobble Roller # YR500YW-8PEZ Work with 6,000 lb Boat
- Recommended 5 inch Diameter Wobble Roller to Fit 1 inch Diameter Shaft
- Is There a Wobble Roller for a Boat Trailer with an Inside Length Less than 1-1/2"
- Wobble Roller, Hog Ring and Washer for an EZ Loader Boat Trailer
- Washer and Retainer Ring Recommendation for Use with Wobble Roller # YR500YW-8PEZ
- Removing Retainer Ring When Replacing Wobble Roller On Boat Trailer
- How to Pick Out New Wobble Rollers for a Boat Trailer
- Wobble Roller Recommendation for a Boat Trailer that Fits 7/8 inch Roller Shaft
- Does Yates Ribbed Wobble Roller for EZ Loader Boat Trailers # YR500YW-8PEZ Include Mounting Brackets
- How to Find the Right Replacement Wobble Roller for a 2006 Magic-Tilt Trailer
- Determining Which Replacement Spindle Fits 2007 EZ Loader GL17E7 Ski Boat Trailer
- Is the Yates Ribbed Wobble Roller # YR500YW-8PEZ Sold Individually
- Wobble Replacement for 1985 Ez Roller Boat Trailer
- Replacement Wobble Roller Needed with 1 Shaft for Older Boat Trailer
- Will Yates 5 Inch Wobble Roller Fit a 1991 EZ Loader Boat Trailer
- Wobble Roller for EZ Loader Boat Trailers
- Replacement Boat Trailer Wobble Roller Installation
- Non-Marking Wobble Rollers to Replace Yates 343R