bing tracking image
Q & A Icon

Wire Color Chart Diagram for Installing Hopkins Multi-Tow 7-Way Blade and 4-Way # HM11141144  

Question:

Jameson, the white ground wire that is attached to HM1114114 plug is screwed on truck, right!, so what white wire is connected to the black wire on the truck, according to color chart, white wire connects to black wire? Theres only one white wire. Also, for reference, what happens if bare orange wire touch metal of truck? Appreciate your imput!

1

Helpful Expert Reply:

I attached a diagram that shows how to match all of the wire colors of the Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer Connector # HM11141144 to the wire colors on your 2017 GMC Canyon.

expert reply by:
1
Jameson C
click to enlarge
Wilfred N. profile picture

Wilfred N.

10/2/2018

Jameson, the white ground wire that is attached to HM1114114 plug is screwed on truck, right!, so what white wire is connected to the black wire on the truck, according to color chart, white wire connects to black wire? Theres only one white wire. Also, for reference, what happens if bare orange wire touch metal of truck? Appreciate your imput!

JamesonC profile picture

Jameson C.

10/2/2018

The white wire of the # HM11141144 is the ground wire for the harness and the black wire of your truck would be the ground so those two need to be connected. Or you can run the white wire of the harness to a clean metal surface on the truck frame as that will ground the harness as well. Since the orange wire of your truck is the 12 volt accessory circuit it will spark if you touch it to the metal of your truck. The fuse related to this circuit will most likely pop too.
Michael R. profile picture

Michael R.

8/9/2020

Please, on 2016 dodge ram 3500 6.5l I need to identify trailer wiring diagram or what color is ground , postive 12v. ect. please give me and answer.

JonG profile picture
Etrailer Expert

Jon G.

8/19/2020

I'm not quite sure what color OEM wires are for which trailer functions on your 2016 Ram 3500 but I can help you out in regards to where each function should be located on your 7-Way socket. You're going to need to test each wire as you run through the functions to determine which wires carry which functions. Here is a link to our helpful article about 7-Way wiring that you can check out.
Randy profile picture

Randy

11/14/2021

Need wiring diagram for factory 02 ford F-250 7 blade hopkins

VictoriaB profile picture

Victoria B.

11/18/2021

@Randy Unfortunately I don't have a chart like this one that corresponds with the wiring colors on your 2002 F-250. Since wiring colors could change over production or in the time since manufacturing if customization or repairs were made, testing the wires for function is always the safest bet.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>