bing tracking image
Q & A Icon

What Fuses Need to be Pulled to Flat Tow a 2017 Buick Envision


where are fuses 29 and 32 located on 2017 buick envision . i understand i have to pull them in order to flat tow behind rv. what dinghy harness do i need. thanks


Helpful Expert Reply:

The F29 (body control module 2) and F32 (body control module 1) are located in the instrument panel fuse block which is located in the passenger glove box. You are correct in that they will need to be pulled each time you flat-tow the vehicle. If you don't want to physically pull the fuses each time then you can install the Roadmaster FuseMaster Fuse Bypass Switch part # RM76512.

The most popular dinghy harness we have for a 2017 Buick Envision is the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267. This kit comes with four diodes, wiring connectors, 6-way trailer connector for the vehicle, and a coiled 6 to 7-way adapter to connect the toad to the motorhome. We use this kit very often as it performs really well and lasts equally as long.

I have attached a review video for you as well.

helpful expert reply by:
Conner L

Products Referenced in This Question

Product Page this Question was Asked From

Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>