Replacement Ramp Hinges for Enclosed Trailer
Question:
I bought a brand new enclosed trailer but the ramp ramp doesnt line up do the sides.... the left top side is open half inch and right side top is over lapping 2 inches... what do I do?
asked by: Kevin P
Expert Reply:
If your trailer is brand new and recently purchased ideally you would return to the dealer to have the ramp corrected. The amount of misalignment you describe seems excessive for a brand new trailer. If the trailer is parked on uneven ground the ramp may tend to lean to the low side; this happens just from the weight of the ramp twisting the hinge. If the ramp leans over even on flat ground then there may be damage to the hinges that secure it to the trailer structure or the ramp itself may be uneven.
We do offer a replacement steel ramp hinge # PLR1902 that installs by welding. Usually several of these will be used to spread the weight of the ramp over more points.
From your photo I cannot see enough of the ramp and trailer to say what the cause for the misalignment might be.
Products Referenced in This Question
Ramp Door Hinge - 8-3/16" Long - 1" Pin Diameter - Steel
- Trailer Door Hinges
- Ramp Door Hinge
- Greasable Pin
- Steel
- 8-3/16 Inch Long
- 4 Inch Wide
- Weld-On
- Polar Hardware
more information >
Product Page this Question was Asked From
Reese Weight Distribution System w/ Shank - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD Only
- No Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Ramp Door Hinge - 8-3/16" Long - 1" Pin Diameter - Steel
- Shop: 4" Wide Continuous Hinge - 6' Long - 3/8" Pin Diameter - Steel
- Search Results: trailer flooring
- Video: Ultimate Overview of the Ramp Door Hinge
- Q&A: Would Ramp Hinges PLR1902 Work as Replacement for H and H Trailer
- Search Results: paint
- Search Results: door hinges
- Search Results: rubber bumpers
- Search Results: electric jack
- Search Results: door hinge
- Shop: Rubber Bumper for Enclosed Trailer Ramp Door - 2-1/2" Diameter
- Shop: Black Armour Heavy-Duty Trailer Mat - Rubber - Black
- Shop: Bent Roller Ramp Door Hinge Pin - 10" Long - 3/4" Diameter
- Shop: Angle Trim for Enclosed Trailer - 93-1/2" Long x 3/4" Tall x 3/4" Deep - Aluminum
- Shop: Bulldog Powered-Drive Kit for Single-Speed Jacks w/ 12,000-lb Capacity
- Search Results: hinge
- Shop: Base Plate for Tow Bar
- Q&A: Option For Hinges For Trailer Ramp Door
- Q&A: Ramp Door Hinges for Toy Hauler
- Q&A: Replacement Cargo Compartment Slam Latch for Broken Kencon Latch
- Video: All About the Butt Hinge w/ Non-Removable Pin
- Video: Butt Hinge w/ Removable Pin: The Breakdown
- Q&A: Does the Polar Ramp Door Hinge # PLR1902 Have 2 Plates for Welding
- Q&A: Replacement Ramp Door Hinge For 6 X 12 Enclosed Trailer
- Q&A: How Thick is the Metal Used For the Butt Hinge w/ Non-Removable Pin # MA37ZR