Axle Spacing To Use 29-1/2 inch Long Leaf Springs with Slipper Axle Tandem Hanger Kit # AP216-H238
Question:
AP216-H238 hanger kit with equalizer e46SR springs K71-385-00 over under Kit Hellos, I’m trying to figure out where these are supposed to be mounted. I purchased the kit from this websiteast week thinking it would come with some sort of general guidelines, like rear hanger this far from center and this far from front, so i know where to tac them to test placement on trailer. Is there a formula or a spec sheet to go off of for this hanger set up? Thanks And also will this over under kit work work with these slipper springs?
asked by: Drew
Expert Reply:
With 29-1/2 inch leaf springs like the # e46SR that you referenced the axle spacing you'll want to use with the hanger kit part # AP216-H238 would be 35-1/8 inches.
You cannot use the over under kits we offer with slipper springs.
Products Referenced in This Question
Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Trailer Leaf Spring Suspension
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- Dexter
more information >
Product Page this Question was Asked From
1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 6000 lbs
- 1-3/4 Inch Wide
- 1 Leaf
- 25-1/4 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Shop: CE Smith Front/Center/Rear Hanger Bracket for Double-Eye Springs - Galvanized Steel - Bolt On
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/2" Center
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Shop: 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 3-1/8" Links
- Video: CE Smith Post-Style Guide-Ons Replacement Hardware Kit Review
- Search Results: equalizer hanger
- Search Results: equalizer
- Search Results: 7 3 4 equalizer
- Search Results: 7 3 4 equalizer
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Q&A: Where Should a Slipper Spring Sit on the Hanger Bolt of My Suspension
- Search Results: e5115 spring
- Q&A: Spacing Between Hangers With Slipper Springs for 8,000 lb Axles and Hanger Kit
- Q&A: Hanger Spacing Dimensions for Installing Slipper Springs on a Boat Trailer
- Search Results: k71~366~00
- Search Results: slipper spring kit
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Q&A: Triple-Axle Trailer Hanger Kit Recommendation for 7K Axles
- Shop: Trailer Hitch
- Article: Trailer Tire Sizing
- Article: Slipper Spring Trailer Suspension System Review
- Article: Double-Eye Trailer Suspension System Review
- Article: Where to Position the Trailer Axle?
- Video: Redline Trailer Suspension - Leaf Spring Suspension - H238 Review
- Video: Review of Redline Trailer Leaf Spring Suspension - Hangers - H202
- Q&A: Slipper Spring and Tandem Axle Hanger Kit Recommendation for a 14k Trailer
- Video: Review of Dexter Trailer Leaf Spring Suspension - Standard Equalizer - HAP-205-01