Could Brophy D-Ring Tie Down Anchor w Backing Plate # RR5K Work Mounted to Plywood  

There's a bit of wiggle room for the hole size needed to install the Brophy D-Ring Tie Down Anchor #RR5K but 3-1/2 inch diameter is the hole size that our installers found worked the best so it would be what I would recommend.

The Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs #RR5K will work well on 1/2 inch plywood decking as long as you use the backing plate. The recessed anchor will actually sit below your plywood, but…

The Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs #RR5K are rated for 5,000 lbs break strength and will work just fine with your application. The 3/4 inch plywood floor is very strong and with the…

To install the Brophy Recessed Trailer D-Ring Tie Down with Backing Plate, part #RR5K, you will drill a 3-1/4 inch hole in the plywood floor for the tie-down to be recessed into the plywood floor. Then, you will mark where the holes for the 4 bolts…

Depends on the condition of the wood but the backing plate of the Brophy D-Ring Tie Down Anchor w Backing Plate #RR5K that you referenced is designed to distribute the weight so that it does not easily rip through the wood. I attached a picture of…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

While the best and most certain way to tell if your 2018 Ford F-250 has the puck system is to call your local Ford dealer with your VIN, it should be pretty easy to tell otherwise. If your bed looks like the accompanying photo - with four accessible…

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

A junction box/7-way plug kit like Epicord #277-000141 or #HS381-9000 lets you convert the camper to match the 7-way RV blade type connector format. This avoids the extra connection points and potential trouble spots from using separate adapters.…