Replacement Key Needed for a Flash E Series Adjustable 2-Ball Mount  

It sounds like you are referring to the Fastway Trailer Hitch Lock and Adjustment Pin Lock Set #FA86-00-3660. The included keys in this hitch lock are indeed a tube/barrel style key that offers better security than standard key mechanisms. This…

The 2 locks on the Diversi-Tech Self-Locking Aluminum Ball Mount #DTALBM6600 are in fact keyed alike for the convenience of the customer. I have provided a link to a video review of this product that shows how the locks are used.

According to my buddy at Diversi-Tech, the set screw that holds the lock cylinder in uses a .050 inch Allen wrench. Before attempting to remove the screw, I would highly recommend soaking the set screw with some penetrating oil because the set screw…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

You can purchase Re-Keying Kit, #DTLBM02RK, to re-key your ball mount. The kit includes a tool to remove the locking cylinder you have in the ball mount now. Once you receive the kit, you will need to put some air tool oil in the hole that the lock…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Hey Tim, Good questions, and camper tie-downs are always a touch confusing so I can explain the difference for you between the two TorkLift camper tie-downs for your 2016 Ford F-250 long bed with factory hitch and no running boards. The difference…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

To know if your 2017 Ford F-350 has an in-bed puck system installed you'll just need to look and see if you have four rounded attachment points (usually covered up when not in use, like in the attached picture). If you don't see these in your…