Recommended Trailer Hitch and Wiring for 2018 Toyota Highlander

Question

Question:

I need a trailer hitch and wiring for a 2018 Toyota Highlander

asked by: Dick

0

Expert Reply:

For your 2018 Toyota Highlander, I recommend the etrailer.com Class III hitch # E98844 which has a nice matte black powder coat that matches the rear trim well. It has a high weight capacity and will work very well for your vehicle. I've attached a photo to assist. If you want a hidden cross tube, then the only option we currently have is the EcoHitch # 306-X7250 which is a nice clean look with a little more ground clearance.

Then I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118449 or for a 7-way # 22119. This also lets you easily add a brake controller like # 90195 which is my recommendation if you will be towing a trailer with brakes.

Finally, I recommend the B&W Tow & Stow 2-Ball Mount # BWTS10035B to give you a rise and drop to tow level. This also gives you the ability to store the ball behind the shank for a clean look when not in use. I also recommend using a hitch lock like # e98882 to protect your investment.

expert reply by: Jason S

0

click to enlarge

Answer 1

The brake controller port for the 2015 Toyota Tundra is located behind the section of the dashboard with the tow/haul button. To reach the connector you will need to locate the notch in the access panel in the center of the dash near the driver's…

view full answer...

Answer 2

The Draw-Tite trailer hitch, #75726, will fit your 2008 Toyota Highlander with the factory OEM 19 inch full-size spare tire. There is a special note in the instructions which I have linked for you. The note states that when storing the spare, it is…

view full answer...

Answer 3

Yes and yes, all of the installation hardware needed to install the Draw Tite Hitch part #75726 on your 2008 Toyota Highlander are included. Also, you will be able to keep your spare tire in it's current location after the install is complete.…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Recommended Trailer Hitch and Wiring for 2018 Toyota Highlander

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching