What do the Codes for the Test Lamps Mean on CURT Adapter 4 Pole to 7 Pole and 4 Pole # C57674
Question:
what do abbreviations BK and RT next to the test lamps stand for ? 12V = 12 Volts BK = ? ? ? BU = Back Up RT = Right Turn TM = ? ? ? LT = Left Turn
asked by: Gary H
0
Expert Reply:
On the CURT Adapter 4 Pole to 7 Pole and 4 Pole w/Test Lamps, # C57674, the test light codes are as follows:
12V = 12 volt hot lead
BK = output from brake controller (if no brake controller is installed, this light will not light up)
BU = reverse lights (if this circuit is not connected on the vehicle it will not light up)
RT = Right Turn
TM = running lights (tail/marker lights)
LT = left turn
expert reply by: Michael H
0
Product Page this Question was Asked From
Adapter 4 Pole to 7 Pole and 4 Pole w/Test Lamps
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- CURT
more information >
Featured Help Information
Instructions
Similar Expert Q&A Pages
- Should the 12 Volt Circuit On the Adapter 4 Pole to 7 Pole with Test Lamps Stay On All the Time
- Test LED on Curt C57674 4 to 7 way 12v Adapter Stays On with Vehicle Shut Off
- Where to Connect the Power Wire for the Curt 4-Way to 7-Way # C57674 on a 2007 Hyundai Santa Fe
- Brake Controller Recommendation for 2018 Ford Edge Titanium with Tow Package
- Will Curt Wiring Harness Fit With Draw-Tite 7-Way Mounting Box
- Can Second Trailer Have Trailer Brakes Activated as Well
- Adding a 7-Way Trailer Connector to a 2007 Toyota Tacoma
- Adding 7-Way Trailer Connector to 2014 Toyota Tacoma without Factory Tow Package
- How to Wire Up a Curt Brake Controller on a 2011 Chevy Silverado
- Recommended Wiring When Adding 7-Way Trailer Connector To 2016 Ford Escape
- BK LED on Curt 7-Way Adapter, Part # C57674, Remains Lit Even Without a Trailer Connected
- Installation of 7-Way and Brake Controller on 2016 Ford Expedition with Factory 4-way
- Adding a 7-Way and Brake Controller to a 2015 Ford Expedition with Factory 4-Way
- Why Would 12 Volt Power Circuit of 7-Way Tester be Active all the Time
- Does the 12 Volt Power Wire Need to Be Ran on a 7-Way Trailer Connector
- Where Does a Brake Controller Plug Into on a 2014 Toyota Tacoma
- How To Charge A Trailer Battery From Your Vehicle While Towing
- 7-Way Trailer Connector for 2011 Toyota Highlander
- Troubleshooting LED Lights on the Curt Adapter to 7-Pole and 4-Pole
- Installing Curt 7-way Trailer Connector Without Connecting Additional Wires
- Can Curt 4 Pole to 7 Pole Adapter C57674 Be Installed On A 2005 Honda Pilot?
- Should the BK Indicator Light on the Curt Adapter be Lit up While Vehicle is Off and No Trailer
- BK Light on Curt 7 Way Connector with Tester Lights Always on with Curt Spectrum Brake Controller
- Will Trailer Turn Signals or Brake Lights Work With Trailer Running Lights Turned On?
- Indicator Lights on Curt 4-Pole to 7-Way Adapter
- Why is 12 Volt Test Light of Curt Adapter With 7-Way Staying On
- No Power to ETBC7, 7-Way Trailer Connector After Installation