Is the Reese Steadi-Flex Compatible with an Underslung Trailer Coupler  

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The Road Armor Shock Absorbing Equalizer Kit part #LC696740 are taller than most other standard equalizers so you'll likely need the longer 3-1/8" shackle straps when using them, the Lippert AP Kit part #LC52SV is a go-to for this as it has…

The torque for the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility #8-174-5UC3 is not specified by the manufacturer. For 9/16 inch studs, the typical lug nut torque will be 120-140 ft lbs based on most…

Dexter 7,000 lb axle hubs come with either 1/2 inch wheel studs like the part #RG03-080 that you referenced or 9/16 inch diameter studs like the #7-257. You'd need to measure what you have to know for certain.

The standard torque on a Redline Trailer Wheel Lug Nut - 9/16 inch, part #6-53, is 135 to 145 ft lbs. This is the torque range that is normally used. If the instructions for the wheel are saying 110 ft lbs there might be a reason, like the wheel…

The Equal-I-zer, #EQ37100ET, and Reese Strait-Line, #RP66084, weight distribution systems are both top notch systems that will get the job done for you, but I usually tend to lean towards the Equal-I-zer systems for a few reasons. First, Equal-I-zer…

Hey Lucas, The Curt MV #C17050 is for total tongue weights between 500 lbs and 600 lbs only (600 lbs isn't actually the minimum), and for a 5,000 lb GVWR camper, the tongue weight is definitely going to exceed what this hitch is capable of. Your…

The Reese Steadi-Flex Weight Distribution 66561 requires a hitch ball with a 1-1/4" diameter shank. Therefore, for a 2" trailer coupler you will want to use part #A-90 and for a 2-5/16" trailer coupler you will want to use part #19286.…

It looks like your 2019 Lance 2465 travel trailer tops out at 6,830 lbs. The Strait-Line Weight Distribution w/ Sway Control item #RP66074 will work for you trailer. It has a tongue weight range of 600 lbs - 1,200 lbs which is perfect for your Lance…

Though The Curt Double Lock, Flip and Store Underbed Gooseneck Hitch #C60721 is not confirmed to fit your 2013 Ford F-150, The B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit #BWGNRK1104 is confirmed to fit. The…