Comparing Curt and Draw Tite Class III Trailer Hitch for 2018 Subaru Forester  

We have the Draw Tite hitch part #76182 which is a confirmed fit for your 2018 Subaru Forester which would be our most hidden option. It will only have the opening of the hitch visible below the rear bumper which will give you the least visible…

The crosstube on the Draw-Tite #76209 actually lines up with the trailer hitch receiver so is not hidden like the Curt #C13382. The only other 2 options for your 2019 Subaru Crosstrek that feature a hidden crosstube are the etrialer.com #e98912 which…

I have included a picture showing what Draw-Tite trailer hitch #76209 looks like when installed on a 2018 Subaru Crosstrek. (It may take a little while for the picture to appear.) The crosstube on this hitch will be visible below the rear fascia on…

As you can see in the provided photo, the etrailer brand #e98839 hitch will indeed fit a 4th Generation Subaru Forester with a single exhaust, like your 2016. Unless your vehicle has an aftermarket exhaust, the hitch will fit fine. I've also…

I was able to go out to the warehouse and measure the Curt hitch #C13144 for you. The distance from the center of the hitch pin hole to the end of the receiver tube is 2-1/2 inches.

The etrailer.com Trailer Hitch Receiver #E98839 is confirmed to fit all models of the 2018 Subaru Forester, however according to my research I am not seeing that there was a Sport model released for the 2018 model year. There is a Sport model for the…

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

You could do that if you wish, you'll just want to make sure that the heat shield is NOT sandwiched between the hitch and the chassis of the vehicle at any point. We frequently hear from folks with concerns about the vehicle being harmed because…

Exactly! Both hitches are very similar in design and construction. That is usually what happens when hitches are custom-fit for your vehicle. The main difference is the finish. I personally prefer the matte finish that #e98839 has. We have them on…

I wasn't able to find your order notes so I am not sure what hitch you have, but the Curt part #C13144 would be the one for your 2014 Subaru Forester that would stick out the most. From the center of it's hitch pin hole to the furthest point…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

Thanks for the information. For your 2015 Subaru Forester, I recommend the etrailer.com Trailer Hitch Receiver #E98839 which has a 2 inch receiver and is able to support tongue weights up to 525 lbs. This hitch will have the top shank of your cargo…