Vent Cover Recommendation for Fan-Tastic Roof Vent 2000DM  

If you blow out a grease seal on a trailer hub by overfilling it with grease using a Bearing Buddy the seal would not still be okay as it would need to be replaced but the Bearing Buddy like the #BB1980A-SS would still be fine. It's very easy to…

For a replacement roof vent for your Fan-tastic 2000DMBT the part #FV802250 would be a great and easy direct fit. It has a manual lift and a thermostat as well.

The replacement dome part number you are looking for is #FVK1020-19. This will fit the Fan-tastic Vent Model 2000TRS with Rain Sensor. I have linked it to this page for your convenience.

To determine if Replacement Fan Motor Assembly Kit #FVK8017-00 will fit your vent assembly you will need to go by the dimensions. I have included a picture showing the hole spacing and other measurements for you. I have also linked the returns…

Yes, the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans #FVK8017-00 is the correct part for your 6504-414. This kit replaces the bow-tie bracket, motor, and blade for your Fan-Tastic Vent roof vent fan. Since the fan stopped…

I spoke with my contact at Fan-Tastic Vents and she verified that the part #FVK8017-00 is a replacement for your 4000 can style motor. She said they actually have this listed as a fit in their system so you are good to go!

To replace your Atwood RV Water Heater, Model #GC10A-4E, the direct replacement is the Atwood RV Water Heater - Gas and Electric - part #AT94022. This is the new version of your existing water heater, so it will have all the same features like a…

Yes, either the Replacement 17-rpm Lift Motor for Fan-Tastic Vent B Series Roof Vents with Powered Lifts #FVK6010-81 or the Replacement 17-rpm Lift Motor for Fan-Tastic Vent B Series Roof Vents with Powered Lifts #FVK6010-80 will work great as a…

According to my contact at Fantastic Vent the correct replacement lift motor to use in your vent is part #FVK6010-81, not item FVK-6050-80. The replacement motor does operate at a higher 17-RPM speed. Since your fan is of a lower rpm and manufactured…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

We have plenty of shade options available that would attach to a hanging ceiling light. For example the shade part #277-000480 fits the RV ceiling light part #277-000328 which has a screw-in cylinder finial that would be used to hold the shade onto…