Weight Distribution Shank Recommendation with 9 inches of Drop for 2-1/2 inch Hitch

Question:

Hi there. I need a weight distribution shank w 9inch drop. Preferrably 2.5inch shank. Is there one you recommend? My Hitch is Husky Centerline TS. Thank you!

asked by: Kyle F

Expert Reply:

The weight distribution shank we offer that has the most drop that fits a 2-1/2 inch hitch is the Curt Shank part # C17132 which has a drop of 9-1/4 inches. Depending on if you calculated the drop you need with the trailer's tongue weight on the hitch or not this could work. If you came up with 9 inches of drop with the tow vehicle unloaded 8 inches of drop might be right when the weight of the trailer is on the rear suspension.

Otherwise we have a 2 inch shank with 9 inches of drop as the Equal-I-Zer part # EQ90-02-4400.

expert reply by: Jameson C